INFRASTRUCTURE AND CIVIL CONCRETE LIFTING AND STABILISING
Slabjack industries can help with the following civil / infrastructure applications
Bridge Approaches
Do you have cracks appearing in your house, is your floor sinking or is your building not level?
We can help stabilise and lift your floor slabs and foundations.
Airport Runways
We can help lift runway areas back level with minimal downtime.
Sea Walls, Spillways, reservoirs and Dam Structuress
Are your revetment walls moving or sinking?
We can stabilise and fill voids, minimising water ingress and scouring and maximising the life of your revetment walls
Railway Foundations
Transformer slabs, switching yards, level crossings, abutments etc.
We can help stabilise and lift your slabs and foundations.
Void Filling
Do you have voids appearing under your slabs? We can help fill and stabilise voids crevices and cracks.
Manholes/pipe joint and Culverts Sealing
We can help curtain grout and stabilise manholes, pipe joints and culverts.
Footpaths and Roads
We can lift and stabilise road pavements back level. We can also help with eliminating footpath trip hazards without the need for replacement.
Ground Stabilisation
We are able to stabilise your site using different resins and injection techniques to achieve and demonstrate a range of load bearing capacities, dependent on your individual requirements
Tanks / Silos
Are your water tanks or silos sinking or not level?
We can help stabilise and level your tanks and silos.
OUR SOLUTIONS
Chemical Injection
Chemical injection is the most cost effective solution for lifting and stabilising sinking or subsiding concrete slabs and foundations.
Slab Jack Industries have the exclusive rights to HMI products in Australia. We source quality polyurethane foam manufactured in USA from over 40% recycled materials, which makes it the greenest polyurethane on the market. We are constantly sourcing and developing new products and procedures to reduce our impact on the environment.
We have a range of chemical and polyurethane injection solutions; such as;
-
Permeation grouting - helps strengthen and solidify sands and gravel
-
Structural polyurethane lifting foam - used to transfer load and return adjacent surfaces to level.
-
Stabilisation polyurethane - used to stabilise and transfer load
-
Waterproof / curtain grouting polymers - used to create a "curtain" / waterproof barrier
RESISTANCE PIERS
The team at Slabjack Industries have undergone training to become the only approved applicators of Grip-Tite foundation solutions products in Australia.
Resistance “Push” Piers are generally used to repair and stabilise foundations of existing structures and homes. They are less invasive than traditional underpinning methods. These piers are installed at the footing of the foundation and attached to the foundation with an engineered bracket. Steel piles are then hydraulically pushed down into the soil from the foundation bracket until they reach bedrock. Once the piers are installed then the home is supported by the piers and not resting on the unstable soil